The New AJAX Super Turn Range now heavier and stronger with the new Fanuc 0i TF control. These machines can be used as a manual lathe by
using the electronic handwheels, the control is used as a simple
DRO measuring system. For one-offs and small batch production
the Super Turn can be programmed, using the flexible electronic turning
cycles, its quick, its convenient and you do not have to be CNC
trained to use the electronic cycles. You can produce tapers, radii,
grooving, multi point profiles and screwcutting by answering simple
questions direct from the Fanuc screen. These electronic cycles
can then be linked together to give a complete electronic programme.
For complicated shapes and batch production, full ISO programming
on the Fanuc 0i Turn Mate control is possible. Other control options include the Fagor 8055 TC Conversatioal control and the Siemens 828D with Shopturn.
AJST500
Features include:
Fanuc Touch screen control
Fagor 8055 TC control
Siemens 828D Shopmill control
Solid cast construction
High power
4 or 8 station automatic turrets
Twin handwheels saddle mounted
Hardened & ground solid ways
Options:
3 & 4 Jaw chucks,
Steadies
Manual Gide i
Seimens 828D Shopturn
Fagor 8055 TC
The AJAX Super Turn machines include fully enclosed guarding, meeting
CE regulations, automatic 4 way indexing toolpost, automatic speed
range change and Fanuc touch screen control and monitor on sliding
pendant.
Machine programmes can be up and downloaded through the RS232 port
or saved directly to the PMCIA card.
Specifications
Model
AJST400
AJST500
AJST600
Centre height (mm)
200
250
300
Swing over bed (mm)
400
500
600
Swing over cross slide (mm)
200
280
380
Distance between centres in mm
1,000
750 / 1,250 /2,000
750 / 1,250 / 2,000
Bed width in mm
300
400
400
Main spindle bore (mm)
52
63 or 86
86 or 110
Spindle nose
A2-5
A2-6
A2-8
Spindle taper
4
4
4
Number of ranges
1
1
1
Variable speed (rpm) with CSS
top on Fanuc Bottom on Fagor
100 - 4,000
100 - 4,000
150 - 3,000
150- 3,500
150 - 2,500
150- 3,000
Working feed rates mm/min
0 - 8,000
0 - ,8,000
0 - 8,000
Rapid feeds M/min
Z=10 -X=8
Z=10 -X=8
Z=10 -X=8
Tailstock diameter
63
80
80
Tailstock quill travel
140
180
180
Tailstock quill taper
4
5
5
Main motor power in kW
5.5
8
12
Pump motor power in kW
0.57
0.57
0.57
Coolant Flow rate Lt/min
25
25
25
Length of machine (mm)
2,500
2,300 / 3,300 / 3,500
2,300 / 3,300 / 4,100
Width of machine (mm)
1,660
1,700
1,700
Height of machine (mm)
1,630
1,850
1,850
Weight of Machine (kg)
1,800
2,500 / 3,000 / 3,300
2,700 / 3,000 / 3,500
Turning has Evolved
Centre lathe turning has progressed at an impressive rate
since the conception of electronics, driving axis and spindles,
and computer driven programming.
The AJAX Super Turn range of machines, combines all the virtues
of conventional turning, electronic cycle turning and full
CNC turning all in ONE machine.
The AJAX Super Turn machines can be used as a manual lathe
by using the electronic handwheels and axis joy stick, the
control is used as a simple DRO measuring system. For the
1 offs and small batch production the Super Turn can be programmed,
using the flexible electronic turning cycles, its quick, its
convenient and you do not have to be CNC trained to use the
electronic cycles. You can produce tapers, radii, grooving,
multi point profiles and screwcutting by answering simple
questions direct from the Fanuc screen. These electronic cycles
can then be linked together to give a complete electronic
programme.
For complicated shapes and batch production, full ISO programming
on the Fanuc 0i control is possible.
The AJAX Super Turn machines include fully enclosed guarding,
meeting CE regulations, automatic 4 way indexing toolpost,
automatic speed range change and new Fanuc touch screen control
and monitor on sliding pendant.
Machine programmes can be up and downloaded through the RS232
port or saved directly to the PMCIA card.
The range starts at 200mm centre height to 300mm centre height,
with bed lengths varying from 750mm to 2,000mm, spindle speeds
vary for sizes of machines but all have CSS fitted as standard.
Axis and spindle drives are all Fanuc to give reliability
and longevity of service.
We can offer these machies with the Fanuc 0i TF Turn Mate i, Fanuc 0i TF Manual Guide i, Siemens 828D Shopturn or the Fagor 8055TC.